Bathroom Vanities Menards – When you install a new bathroom vanity, you do not just want to make sure the plumbing is correct. The other thing you need to do is to make sure the vanity is the level, or it just will not look right. The leveling device includes checking both front and back and side to side. Leveling a bathroom vanity is not difficult. The average person can level the device in just a few minutes, using some simple tools.
Check the Bathroom Vanities Menards to make sure it is not attached to the wall. If so, use a screwdriver to remove the fastening screws. Place a level on the top of the base. Check vanity for level side to side and front and back. Place wood shims underneath the bottom of the areas that are too low. Tap them under with a small hammer just enough to get unit level. Do this from side to side and front and back. Cut out any excess material that protrudes from under the cabinet, using a matt knife.
Tips and warnings
Bathroom Vanities Menards for continuously check the level of the device. Sometimes single shims can fix the problem. Be sure to keep sharp tools out of reach of children.